These connectors mate with any other standard DB-15 connectors. The DB15 connector is commonly found on computers, electronic devices, DAQ equipment, and industrial controls. On PC's, DB-15 standard density connectors are typically used for game ports.
The insulation displacement (IDC) contacts on these connectors allow them to be quickly and easily crimped onto 15-wire flat ribbon cable.
A strain relief clip is included with each connector.
Part # | Description | Data Sheet | PDF Drawing | DWG Drawing |
---|---|---|---|---|
CNIx | CNI Series D-Sub IDC Connectors | |||
- | D-Sub Panel Cutout Drawing |
Captive screws compatible with these IDC DSUB connectors may be purchased from Winford Engineering. These are very useful for fastening the DSUB connectors to mating equipment. They may be used with DSUB connectors which have either the Unthreaded Holes or the Threaded Inserts hardware options; however, they work particularly well with the Threaded Inserts, which conveniently retain the screw until the time of installation.
NOTE: The captive screws should be installed in the connector BEFORE the strain relief is installed. After the strain relief is installed, installation of the screw becomes much more difficult.
Click here for the captive screw ordering page.
Pricing and Ordering
Product # | Description | 1+ | 10+ | 100+ | RoHS | Buy Now |
---|---|---|---|---|---|---|
CNI15F-SF-H-BLK | DB15 Female IDC Crimp Connector, Unthreaded Holes, Black | $2.15 | $2.10 | $1.95 | Yes | |
CNI15M-SF-H-BLK | DB15 Male IDC Crimp Connector, Unthreaded Holes, Black | $2.15 | $2.10 | $1.95 | Yes |
Quantity | Price |
---|---|
1+ | $2.15 |
10+ | $2.10 |
100+ | $1.95 |
Quantity | Price |
---|---|
1+ | $2.15 |
10+ | $2.10 |
100+ | $1.95 |
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.