DIN Rail Extender - Right Angle DIN Rail Mounting Plate - 3.0" x 3.5"
- Expand your DIN rail mounting space
- Utilize cabinet depth to save DIN rail space
- Versatile, universal design
- Sturdy construction
- 3.0" x 3.5" plate size
- Available with DIN rail mounted on one or both sides of plate
- Comes with DIN rail installed on the adapter plate
- DIN rail length: 3.0"
General Description
Save DIN rail space by mounting your devices perpendicular to the DIN rail in your cabinet. This utilizes cabinet depth to fit more devices in the available space. You can mount hubs, routers, and many other devices at a fraction of the horizontal space they would normally consume. This product comes with standard 35mm DIN rail installed on the adapter plate; simply snap your devices on and install the assembly onto your existing DIN rail.
The mounting plate is made of sturdy 0.125" thick FR4 material (glass-reinforced epoxy laminate material) and comes with DIN rail installed on the plate. This product is available with DIN rail installed on just the front of the plate ('-1' option) or on both front and back ('-2' option). The plate comes with a sturdy steel DIN rail bracket (part# DINM30) installed. The DIN brackets may be purchased alone if you desire the bracket without the adapter plate.
These adapter plates are alternately known as DIN rail mounting plates, DIN adapter plates, DIN rail brackets, etc. We sell many varieties of universal DIN rail mounting plates and DIN rail brackets for numerous applications.
Application Examples
The photos below show how a DIN rail mounting plate with a right angle bracket might be mounted to a device.
Click image to enlarge.
Click image to enlarge.
Click image to enlarge.Product Options
This product is available with two different options.
- Rail on Single Side: Part# DINP03-3035D-1 comes with DIN rail mounted on just the front side of the plate. If desired, the user may detach the DIN rail and install on the back side of the plate if that is preferable for the application.
- Rail on Both Sides: Part# DINP03-3035D-2 comes with DIN rail mounted on both the front side and the back side of the plate. This option provides twice the length of DIN rail for mounting your devices.
Installation and Removal
Mounting Your Devices
Simply snap your devices onto the DIN rail which is mounted on the adapter plate. Install the entire assembly on your existing DIN rail.
Installing and Removing the Plate Assembly
These DIN rail plate assemblies are easily attached and detached from the DIN rail. When on the rail, the bracket latches to the rail on both the top and bottom lips of the rail. The bracket should be oriented such that the "fixed" (non spring-loaded) end of the bracket mounts to the top of the DIN rail, thus allowing the fixed end to bear the load. The spring-loaded sliding hooks will then grip the bottom of the DIN rail. This arrangement provides the greatest rigidity and load capacity.
There are two methods for removing the plate from the DIN rail:
- Push & Pivot: In most cases, the simplest method is to push up on the assembly, pivot the top out away from the rail, and lower the entire assembly off the rail. This technique does not require access to the release handle on the bracket which makes this method easier.
- Release Handle: If, for some reason, the Push & Pivot method does not work for your application, you can also remove the plates from a DIN rail using the release handle on the bracket. Either pull the handle from the bottom edge of the bracket, or push the handle down from the top edge of the bracket. This releases the sliding hooks that grip the bottom of the rail and allows the bottom edge of the bracket to swing out away from the DIN rail. The entire plate and your mounted device can then be lifted off the DIN rail.
Product Documents
| Part # | Description | PDF Drawing | DWG Drawing | IGES Model | STEP Model |
|---|---|---|---|---|---|
| DINP03-3035D-1 | Right Angle DIN Rail Plate, 1 Rail | 
| 
| 
| 
|
| DINP03-3035D-2 | Right Angle DIN Rail Plate, 2 Rails |
|
|
|
|
Right Angle DIN Rail Plate, 1 Rail
Right Angle DIN Rail Plate, 2 Rails
Product Details
- 3.0" x 3.5" plate size
- DIN rail length: 3.0"
- Plate Constructed of 0.125" thick FR4 material
- 25mm wide right angle steel DIN bracket
- Clips onto 35mm DIN rail
- Color: Black
Pricing and Ordering
| Product # | Description | 1+ | 10+ | 25+ | 50+ | RoHS | Buy Now |
|---|---|---|---|---|---|---|---|
| DINP03-3035D-1 | DIN Rail Right Angle Adapter, 3.0" x 3.5" Plate, with 2.95" 35mm Rail Section Installed on Right Side | $15.50 | $14.30 | $14.10 | $13.75 | Yes | |
| DINP03-3035D-2 | DIN Rail Right Angle Adapter, 3.0" x 3.5" Plate, with 2.95" 35mm Rail Section Installed on both Sides | $18.00 | $16.60 | $16.35 | $15.95 | Yes |
| Quantity | Price |
|---|---|
| 1+ | $15.50 |
| 10+ | $14.30 |
| 25+ | $14.10 |
| 50+ | $13.75 |
| Quantity | Price |
|---|---|
| 1+ | $18.00 |
| 10+ | $16.60 |
| 25+ | $16.35 |
| 50+ | $15.95 |
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.