M12 12-Pin Panel Mount Breakout Boards

BRKQAM12A-12F-A (Side View)

(click image to enlarge)

Similar M12 Breakout, Installed on a Panel

Available with male or female 12-pin, A-coded M12 connector
Cost effective and reliable cable termination
Available with screw terminals
Terminal for each of the 12 lines, plus shield
Convenient strain relief feature for wires

Scroll to Buy

General Description

These M12 breakout boards are part of the BRKQ series, which provides a clean and simple solution for terminating wires at a connector through a panel or enclosure wall. These boards are great for making machine network connections, connecting external sensors, connecting human interface devices, and neatly transitioning cabling through an enclosure.

This board has a 12-pin, A-coded M12 connector that brings all twelve lines and shield out to screw terminals.

A breakout board is sometimes referred to as a "transition module", "terminal board", "terminal block", "breakout box", "breakout adapter", "terminator", or "interface module".

Features

M16 Panel Nut

This board comes with a panel nut installed on its connector. This nut is used to secure the board to a panel or enclosure wall. Simply unscrew the nut from the connector, insert the connector through the wall, and reattach the nut to the connector. These boards use a size M16 panel nut.

Strain Relief Feature

(8-pin M12 Board Shown)
Enlarge

Click image to enlarge.

This board also has a strain relief feature that eases the tension placed on wires connected to the terminal. To utilize this feature, simply wrap a cable tie (sold separately) around the strain relief extension and close it over the wires that populate the board's terminals.

Installation

To install a BRKQ board onto a panel or piece of equipment, follow these three simple steps:

Product Details

Available with screw terminals
Terminal for each of the 12 lines, plus shield
Terminals accommodate wire sizes from 16AWG to 24AWG
Convenient strain relief feature for wires
Connection points are labeled with pin numbers
No soldering or crimping required

Accessories

Cable Ties (Sold Separately)

These cable ties work very well as strain relief on a variety of Winford breakout boards, including boards in the BRKQ series. They are a great choice for tying both small and large wire bundles to the breakout boards.

Product Documents

Part #	Description	PDF Drawing	DWG Drawing	IGES Model	STEP Model
BRKQAM12A-12F-A	M12 12-Pin A-Coded Female
BRKQAM12A-12M-A	M12 12-Pin A-Coded Male

BRKQAM12A-12F-A

M12 12-Pin A-Coded Female

BRKQAM12A-12M-A

M12 12-Pin A-Coded Male

Pricing and Ordering

Product #	Description	1+	10+	RoHS	Buy Now
BRKQAM12A-5F-A	M12 Breakout Board, Panel Mount, 5-Pin Female Connector with Shield, A-Coded, Screw Terminals, with M16 Panel Nut	$25.00	$24.15	Yes
BRKQAM12A-5M-A	M12 Breakout Board, Panel Mount, 5-Pin Male Connector with Shield, A-Coded, Screw Terminals, with M16 Panel Nut	$25.00	$24.15	Yes

BRKQAM12A-5F-A

RoHS Yes

M12 Breakout Board, Panel Mount, 5-Pin Female Connector with Shield, A-Coded, Screw Terminals, with M16 Panel Nut

Quantity	Price
1+	$25.00
10+	$24.15

BRKQAM12A-5M-A

RoHS Yes

M12 Breakout Board, Panel Mount, 5-Pin Male Connector with Shield, A-Coded, Screw Terminals, with M16 Panel Nut

Quantity	Price
1+	$25.00
10+	$24.15

All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.

Need a quality screwdriver for your breakout boards? Winford sells Wiha screwdrivers!